The used Sennheiser e935 is a cardioid dynamic vocal microphone with a 40 Hz – 18 kHz range, 2.2 mV/Pa sensitivity, 150 dB Max SPL and 300 Ω impedance, offered here at condition grade A. For a B2B buyer the decision is not whether the model is suitable — it is whether the specific units behind this Sennheiser e935 listing are worth committing to, and what you must confirm before paying.
A Grade A used Sennheiser e935 is a reasonable stock addition for rental companies and venues that need a loud-stage vocal dynamic with a cardioid pattern and a standard XLR 3-pin connection. The listing confirms the model, the grade and the core specs, but leaves year of manufacture, quantity, accessories and test detail unstated, so the buy decision rests on what you confirm directly with the seller before payment.
1. The 2.2 mV/Pa sensitivity and 150 dB Max SPL suit loud stages, but they also mean the mic will expose gain-staging mistakes on cheap preamps. 2. Grade A describes the unit's condition band, not its age — year of manufacture is on request, so age must be asked for, not assumed. 3. Quantity available is on request, so batch size and run-matching are open questions a distributor must close early. 4. Accessories are listed as N/A, so assume nothing about clips, pouches or cases until the seller confirms in writing.
The listing states the essentials cleanly. Pattern is cardioid, type is dynamic, frequency range 40 Hz – 18 kHz, sensitivity 2.2 mV/Pa, Max SPL 150 dB, impedance 300 Ω, connector XLR 3-pin, weight 290 g. Included accessories are marked N/A, year of manufacture is on request, and quantity available is on request. Condition grade is A.
Read together, those numbers describe a microphone built for stage vocal work at high level. A 150 dB Max SPL figure means the capsule is not the limiting factor when a singer works close to a loud monitor wedge or a dense backline. The 2.2 mV/Pa sensitivity is on the hotter side for a dynamic, which is useful on quiet sources but also means the mic reaches usable level early in the preamp's gain range. The 300 Ω impedance is a comfortable load for typical console and stage-box inputs.
The cardioid pattern is the practical constraint. It rejects the rear but still accepts a wide front arc, so monitor placement and wedge angle matter more than the spec sheet suggests. For a rental fleet, that is a training point as much as a purchasing one.
Specifications describe a new unit. They say nothing about the specific microphones in this batch, and several of those gaps change the buy decision.
Year of manufacture is not disclosed. For a dynamic microphone the capsule suspension, grille foam and body finish age differently, and a buyer planning multi-year rental depreciation needs an age band to model replacement cycles. Without it, you cannot tell whether this is recent production or an older run.
Quantity available is not disclosed. A distributor allocating stock across several venues needs to know whether the batch covers the order in one go or whether units will arrive from mixed runs. Mixed runs are not a defect, but they complicate matching and spare planning.
Included accessories are N/A. Whether a clip, pouch or case ships with each unit affects the true landed cost, because those items are bought separately otherwise.
There is no stated test result, no capsule condition note, no grille or connector inspection detail, and no statement about matching by production run. Grade A is a condition band, and the grading explanation is worth reading before you treat the letter as a substitute for a condition report. None of this is a red flag on its own; it is simply the list of questions the listing does not answer.
Do not choose this listing if your procurement process requires a documented year of manufacture before a purchase order can be raised. The listing puts that value on request, so a buyer with a fixed form that demands a production year will stall here.
Do not choose it if you need a stated warranty period, a published MOQ or a confirmed lead time to slot into a project schedule. None of those values appear in the materials, and a buyer who needs them contractually should treat this as an enquiry, not a transaction.
Do not choose it if the application needs a condenser microphone's sensitivity for quiet acoustic sources, or an omnidirectional pattern for a shared table or room-capture position. The e935 is a cardioid dynamic, and no amount of condition grading changes what the capsule does. Rental companies building a mixed inventory can compare this vocal dynamic against the wider range of used pro audio equipment to plan the rest of the order around vocal positions.
Do not choose it if you are buying a single unit for a one-off event and cannot absorb the cost of a condition check. The economics of a used purchase work for fleet buyers who spread inspection effort across volume; they work less well for one-off purchases where the check costs as much as the item. Venues equipping a shared stage should check how this cardioid dynamic fits a worship PA system before committing the batch to vocal channels.
The obvious trade-off is price against certainty. The listing publishes no price, so the first comparison you can actually make is against your own alternative sources, and the value of the grade A claim depends entirely on how much condition detail the seller will share before payment. A buyer who values documented certainty over unit cost should weight that heavily.
A second trade-off is sensitivity against control. The 2.2 mV/Pa figure is helpful on quiet singers and low-output sources, but on a loud stage it narrows the usable gain window. Engineers who like a lot of headroom before feedback will need to work the trim more carefully, and rental companies should expect to brief operators rather than assume plug-and-play behaviour.
The third trade-off is flexibility against pattern discipline. A cardioid dynamic is the workhorse choice for vocal positions, but it is not the right tool for every channel on a stage. Buyers building a mixed fleet should treat this as a vocal-position purchase, not a general-purpose microphone purchase, and plan the rest of the used pro audio equipment order around that.
Finally, weigh quantity uncertainty. If the batch size is unknown, you cannot tell whether this is a top-up purchase or a fleet-building purchase. That changes how much inspection effort is justified per unit.
Ask the seller for the facts the listing leaves open, in writing, before any payment. Specifically: year of manufacture or production run for the units offered, quantity actually available, whether accessories ship with each unit, and what the grade A assessment covered — capsule, grille, body, connector. Ask whether the units are matched by run.
Then confirm the commercial frame: price basis, packing method for export, and the shipping terms you will work to. OxGears handles export orders, so the contact page is the right place to open that conversation and request availability against your quantity.
On receipt, plan a bench check before the units enter rental stock: confirm the connector seats cleanly, listen for capsule rattle, and check the grille for deformation. That check is your own process, not a claim about these units.
The listing states condition grade A. The grade is a condition band; the listing does not break down capsule, grille, body or connector condition separately.
Cardioid dynamic, 40 Hz – 18 kHz frequency range, 2.2 mV/Pa sensitivity, 150 dB Max SPL, 300 Ω impedance, XLR 3-pin connector, 290 g weight.
No. Year of manufacture is on request and quantity available is on request. Both must be confirmed with the seller before purchase. Buyers weighing this cardioid dynamic against other stock should also review the Crown CM-310A microphone as a second microphones option before finalising a fleet order.
Included accessories are listed as N/A, so nothing is confirmed. Ask the seller what ships with each unit.
No price, warranty period, lead time or MOQ is published in the materials. These must be requested directly. ## Sources
Sennheiser e935 product listing on OxGears: /products/sennheiser-e935-6pcs/
OxGears used pro audio equipment catalogue: /products/
OxGears contact: /contact/
Manufacturer published specifications for Sennheiser e935 (no verifiable link supplied).
Not sure this unit fits your rig? Talk to our technical team before you buy.
Professional-grade dynamic handheld microphone, suitable for vocal performance and live sound reinforcement. Features a cardioid polar pattern and rugged construction, suitable for stage and rental use. The photo shows a set of 6 used units, with slight signs of use on the exterior.
Grade A used Sennheiser EW 300 G3 set: two handhelds, two receivers, hard case. What the listing confirms, what it leaves open, and how to inspect before paying.
A process guide for overseas distributors and rental companies evaluating bulk used microphone lots, covering inspection, grade implications, and trade-offs.
How overseas distributors and rental companies should define, inspect and price bulk used microphone lots before asking OxGears for availability.
