The Barefoot MicroMain27 is a compact nearfield/midfield monitor built around two 6.5" woofers and a 1" tweeter, rated at 200 W RMS with a 45 Hz – 22 kHz frequency range, 112 dB max SPL and 8 Ω impedance. It terminates on a Neutrik NL4 connector and weighs 12.7 kg per unit. For distributors, rental companies and venue buyers sourcing second-hand stock, these figures are the baseline to verify against the physical unit, since driver swaps and connector retrofits are common on working monitors.
Condition grade B is the working grade: fully functional with visible cosmetic wear. On a used MicroMain27, expect scuffs on the cabinet, possible edge dents, and wear around the NL4 panel. Grade B does not mean compromised acoustics, but it does mean the buyer should confirm that both 6.5" woofers and the 1" tweeter are original and matched, that surrounds and cones show no cracks or separation, and that the NL4 connector locks securely with no play or corrosion on the pins. Buyers who also run Barefoot amplification should read our used amplifier buying guide for the same condition-first approach to second-hand stock.
Inspection priorities for this model are driver integrity and cabinet sealing. Ask for close-up photos of each woofer cone, surround and dust cap, the tweeter face, and the rear connector plate. Request a sweep or pink-noise test confirming output from both woofers and the tweeter, and check for rub, buzz or rattle at moderate level. Because the cabinet is sealed, verify there are no cracks at the baffle or rear panel that could cause air leaks and alter low-frequency response. Distributors building a full venue package often pair nearfield monitors with a used Meyer Sound MINA line array from the same export stock.
For overseas B2B buyers, confirm quantity available and year of manufacture directly with the seller rather than assuming either. Ask whether units are sold singly or as matched pairs, and whether original grilles, feet and any mounting hardware are included. Specify packaging for international freight: individual foam or double-boxing, corner protection, and driver-side cushioning, since 12.7 kg monitors are easily damaged in transit if only single-boxed. For rental companies equipping hotel ballrooms and reception halls, these monitors also slot into a banquet event PA system alongside the main reinforcement.
Use the published specs as your acceptance checklist: two 6.5" woofers, one 1" tweeter, 200 W RMS, 45 Hz – 22 kHz, 112 dB max SPL, 8 Ω, Neutrik NL4, 12.7 kg. Any unit that deviates from these should be flagged before purchase. For rental fleets and venue installs, grade B Barefoot MicroMain27 units are a sensible balance of cost and reliability provided the drivers, connector and cabinet are verified as described. Buyers sourcing multiple lines at once can review the full used pro audio equipment for export department for other second-hand units in stock.
Questions about this unit or about shipping to your country? Contact us for condition photos, test results and a quote.
The Barefoot MicroMain27 is a three-way active monitor speaker, equipped with dual 6.5-inch woofers and a 1-inch tweeter, suitable for recording studios, post-production, and small-scale live monitoring. The cabinet features a sturdy black textured enclosure with a silver front baffle design; it shows signs of use but is fully functional.
Practical guide to buying a used Avid XMON monitor controller: what to check on DB25 I/O, MIDI, mute logic and rack condition before export.
What distributors, rental companies and venue buyers should check before buying used Chauvet LED bar fixtures graded B, from DMX testing to export packing.
Practical guide to buying the LA Audio line array system second hand: specs, A-grade condition checks, rigging safety and export tips for B2B buyers.
