A Grade A used Martin Audio WS2 is a two-way full-range speaker with 2 × 12" LF drivers and a 1.75" HF compression driver, offering 1200 W continuous power handling and 134 dB max SPL. It is a solid choice for rental companies and venues needing a high-output, medium-throw box, but you must verify the actual condition of the drivers, the availability of rigging hardware, and the amplifier compatibility before committing. Ask for availability and a quote for this specific unit through the product page.
1. The WS2 is a high-output, two-way design with 90° × 60° coverage, suited to medium-throw applications in clubs, houses of worship, and corporate events. 2.
Grade A means the unit is fully functional and cosmetically good, but it does not guarantee the drivers are original or that the cabinet has never been re-coned. 3. The 4 Ω impedance and 1200 W continuous rating require an amplifier that can deliver stable power at 4 Ω per channel, so check your amp inventory first.
4. Unknown factors like serial history, service records, and flight-case condition are critical for pricing and risk assessment, so request them before paying.
The listing presents a Martin Audio WS2 in Grade A condition. The specifications show a two-way full-range speaker with two 12-inch low-frequency drivers and a 1.75-inch high-frequency compression driver. Power handling is rated at 1200 W continuous, with a frequency range of 55 Hz to 20 kHz and a maximum SPL of 134 dB. The impedance is 4 Ω, and coverage is 90° horizontal by 60° vertical. The cabinet measures 762 × 457 × 457 mm and weighs 42 kg. It uses Neutrik NL4MP connectors. Year of manufacture and quantity available are listed as "on request."
This combination of specs implies that the WS2 is designed for applications where high output and wide coverage are needed from a single enclosure. The dual 12-inch woofers provide substantial low-frequency output, making it suitable for full-range music playback without a subwoofer in many cases. The 90° × 60° coverage pattern is relatively wide, so a single box can cover a broad area, but it also means that in tight arrays, you may need to angle cabinets carefully to avoid excessive overlap. The 42 kg weight is manageable for two people but requires proper lifting technique and rigging hardware if flown. The 4 Ω impedance means that amplifiers must be capable of delivering the rated power into 4 Ω; many modern amplifiers are, but older or budget models may struggle.
A Grade A rating indicates that the unit is in excellent working condition and may have minor cosmetic wear. However, it does not specify whether the drivers are original, whether they have been re-coned, or whether the cabinet has been repainted or repaired. These details matter because re-coned drivers can affect resale value and performance consistency.
The datasheet provides the core technical specifications, but it does not disclose several critical factors for a used purchase. The serial number history is unknown, so you cannot verify the age or whether the unit has been reported stolen. Service records are not mentioned, so you do not know if the drivers have been replaced or if the crossover has been serviced.
The actual hours of use are not disclosed, which affects the remaining life of the drivers and the condition of the capacitors in the crossover. The flight-case condition is not described; if the unit ships in a case, its condition affects protection during transport and storage. The year of manufacture is listed as "on request," which is a key detail for assessing age-related wear. Rental companies that want a lighter alternative alongside the WS2 can also check the used JBL EON1500 for sale before finalising their amplifier and rigging plan.
The quantity available is also "on request," so you cannot plan a multi-unit purchase without asking. Price, warranty, lead time, and MOQ are not stated, so you must request a quote. Rental companies building out a full system can browse second hand pro audio gear at OxGears to pair this cabinet with suitable amplifiers and processing.
These unknowns matter because they directly impact the total cost of ownership. For example, if the drivers are original and have many hours on them, you may need to budget for re-coning soon. If the flight case is damaged, you may need to factor in a replacement. Without service records, you cannot be sure that the unit has been maintained to a professional standard. Buyers who want a second reference point on driver and cabinet checks should read the Martin Audio A55 buying guide condition notes before requesting photos of the WS2.
This unit is not for buyers who need a lightweight, portable speaker for small gigs or DJ sets. At 42 kg, it is not a one-person lift, and it requires proper mounting or flying hardware. It is also not for venues with low ceilings or limited rigging capacity, as the cabinet is designed to be flown or pole-mounted. If you do not have an amplifier that can deliver 1200 W continuous into 4 Ω per channel, this speaker will not perform to its potential and may even be damaged by underpowering. Additionally, if you require a warranty or guaranteed lead time, this listing does not provide them, so you should look elsewhere or be prepared to negotiate.
The WS2 offers high output and wide coverage, but its 4 Ω impedance means you cannot parallel as many cabinets on a single amplifier channel as you could with 8 Ω boxes. This may increase the number of amplifier channels needed for a given system size. The 90° × 60° coverage is wide, which is good for single-box applications but can cause comb filtering when multiple boxes are arrayed closely; you may need to use fewer boxes or apply DSP to manage the overlap.
The Grade A rating suggests good condition, but without service records, you cannot be certain that the drivers are original or that the unit has not been re-coned. Re-coned drivers can be perfectly functional, but they may not match the original factory specifications exactly, which could affect resale value. Finally, the weight of 42 kg is on the higher side for a two-way box, so rigging and transport costs may be higher than with lighter alternatives.
Before paying, request the serial number and year of manufacture to verify age and provenance. Ask for detailed photos of the drivers, the cabinet, and the connectors, and request any service records or re-coning history. Confirm the availability of rigging hardware, such as flying frames or pole mounts, and whether a flight case is included and its condition. Houses of worship weighing the WS2 should review the worship PA system options so the 90° × 60° coverage and 4 Ω load match their room and amplification.
Verify that your amplifier can deliver the required power at 4 Ω. Finally, ask for a quote that includes shipping to your location and any export paperwork. You can initiate this by visiting the product page and using the contact form to ask for availability and a quote for this used Martin Audio WS2 for sale.
The listing states 1200 W continuous.
The impedance is 4 Ω.
No warranty is mentioned in the listing.
The coverage is 90° horizontal × 60° vertical.
The year of manufacture is listed as "on request." ## Sources Buyers who need a lighter box for smaller rooms should compare this unit against other used PA speakers before committing to the 42 kg WS2.
- OxGears listing for Martin Audio WS2: https://oxgears.com/products/martin-audio-ws2/ - Manufacturer published specifications for Martin Audio WS2 (no URL provided)
Comparing options or ready to price a unit? Request a quote with your destination country and quantity.
Martin Audio Wavefront Series WS2 full-range professional loudspeaker, 4Ω impedance, equipped with Neutrik NL4MP input/link connectors. Suitable for small to medium-sized performances, theaters, and fixed installation systems. The enclosure is a black-painted wooden structure with a protective front grille, and the rear panel clearly indicates the model and electrical parameters.
Grade A used Martin Audio XH15: what the 15-inch two-way specs mean for deployment, what the listing leaves open, and how to inspect before you pay.
Practical guide for distributors and rental companies evaluating used Martin Audio DLS-12 speakers. Specs, condition grade B notes, and export tips.
Practical guide to sourcing the Martin Audio A55 second-hand: what to inspect, how Grade A is assessed, and what distributors and rental firms should verify before ordering.
