A Grade A used LAB.GRUPPEN FP10000Q is listed with 4 channels at 2500W @ 4Ω per channel, built-in DSP, XLR balanced inputs, Speakon outputs, NomadLink IN/OUT networking, 4U rack height, 24 kg weight and 200-240V operation, with 5 units available and marked as tested. If you need this amplifier for a rental rack or a fixed install and you operate on 200-240V mains, it is a credible candidate — but the listing alone does not tell you age, service history or how each of the five units was tested, and those are the facts that decide whether the price is right.
Buyers weighing this four-channel amp against other high-density options should also read the used Powersoft T304 buying guide for a parallel view on condition checks and test documentation.
The listing confirms a 4-channel, DSP-equipped, NomadLink-networked amplifier in Grade A condition with five units available, which suits rental companies and system integrators running LAB.GRUPPEN or NomadLink-controlled rigs on 200-240V. Before paying, ask for serial numbers, service records, the test procedure behind "Tested: Yes", and photos of the rear panel and Speakon/NomadLink connectors — none of which the listing discloses. You can request availability and a quote for the specific units.
1. The FP10000Q is a 4-channel amplifier rated 2500W @ 4Ω per channel with built-in DSP, so one 4U unit can cover a bi-amped stereo system or a 4-way rack position. 2. NomadLink IN/OUT and network control mean the unit is designed to sit inside a monitored amp rack, not as a standalone box in a venue with no network plan. 3. Grade A is a condition grade, not a service history — serial numbers, hours and repair records are Unknown / Not disclosed in the listing. 4. Voltage is stated as 200-240V ~ 50-60Hz, so buyers in 100-120V markets must plan for that before ordering.
The listing gives a clean, verifiable set of facts: 4 channels, 2500W @ 4Ω per channel, built-in DSP, XLR balanced inputs, Speakon speaker outputs, NomadLink IN/OUT, front-panel rotary knobs with LED indicators and mode switches, 4U rack units, 24 kg, 200-240V ~ 50-60Hz, tested, quantity available 5, condition grade A. Those are the numbers you can quote internally without further confirmation.
What the spec combination implies is more useful than any single figure. Four channels at 2500W @ 4Ω in a 4U, 24 kg chassis means the amplifier is dense — one unit replaces what would historically be two stereo amps plus a separate DSP, which changes rack planning, power distribution and cooling requirements. The built-in DSP plus front-panel rotary knobs and mode switches means the unit can be configured at the front panel without a laptop, which matters for rental stock that changes hands between operators. NomadLink IN/OUT means the amplifier is intended to be daisy-chained and monitored as part of a rack, so the value of the unit rises sharply if you already run NomadLink and falls if you do not.
The 200-240V input is a deployment constraint, not a footnote. Any buyer shipping into a 100-120V territory needs to confirm how the amplifier will be powered before committing, because the listing does not offer a dual-voltage option. The quantity of 5 is also meaningful: it is enough to build a matched amp rack, but only if the units are from the same production batch and have similar service histories — which the listing does not state.
For context on how the A grade is applied across the catalogue, see how used professional audio is graded A, B and C.
The manufacturer specification sheet and this listing both stop short of the facts that decide a used purchase. Unknown / Not disclosed: the serial number and production year of each of the five units; the actual operating hours and whether they served touring or install duty; any repair, recap or fan-replacement history; whether the built-in DSP presets and firmware are current and whether any lock codes apply; the condition of the Speakon connectors, XLR sockets and NomadLink ports; whether the front-panel knobs and mode switches are intact; and whether flight cases, rack ears or original packaging are included. Rental companies and integrators sourcing multiple units can benchmark channel count, DSP and networking against other second hand pro audio gear before committing to a batch.
The phrase "Tested: Yes" is the most important gap. It does not say what was tested, at what load, for how long, or with what result. A bench check at idle and a full-load burn-in at 4Ω are very different claims, and only the second one tells you anything about the output stage and power supply. Ask for the test procedure in writing.
Condition grade A tells you the cosmetic and functional band the unit sits in, but it does not substitute for a service record. On a 4-channel amplifier of this density, fan health and capacitor age are the two things that most affect remaining life, and neither appears in the listing. If you are buying multiple units for a rack, mismatched histories across five amplifiers is a real operational risk.
Do not choose this unit if you operate on 100-120V mains and cannot support 200-240V distribution — the listing states 200-240V ~ 50-60Hz and nothing else. Do not choose it if you need a single amplifier for a small fixed install where 4 channels at 2500W @ 4Ω and NomadLink monitoring are more capability than the room will ever use; you would be paying for density and networking you cannot exploit.
Do not choose it if you cannot obtain serial numbers and service records before payment. Five units available is an advantage only if they can be verified as a coherent batch; if the seller cannot confirm that, treat each unit as an individual risk.
Do not choose it if your venue or rental operation has no plan for network control and no spares strategy. An amplifier designed around NomadLink monitoring is at its best inside a managed rack, and a single unmonitored unit in a remote room is a poor fit for what this product is built to do. Rental companies and integrators sourcing multiple units can benchmark channel count, DSP and networking against other used pro audio equipment before committing to a batch.
Density versus serviceability. Four channels at 2500W @ 4Ω in 4U and 24 kg is excellent rack economy, but dense amplifiers concentrate heat and make fan and filter maintenance more critical. In a rental fleet, that means scheduled cleaning and fan checks become part of the cost of ownership, not an optional extra. For fixed installs in hotels and function rooms, pairing this amplifier with a properly planned banquet event PA system keeps the NomadLink rack monitored and the four channels fully used.
Capability versus complexity. Built-in DSP with front-panel control and NomadLink networking removes outboard processing from the rack, but it also means configuration state travels with the unit. When you buy used, you inherit whatever presets and settings the previous owner left — confirm the units can be reset and reconfigured to your standard.
Batch buying versus single units. Five units available lets you standardise a rack, which is a genuine operational gain for rental companies and integrators. The trade-off is that you are committing to one seller's batch without disclosed histories; buying one unit to test before committing to the rest is the lower-risk sequence.
Grade versus history. Grade A reduces cosmetic and functional uncertainty, but it does not price in remaining service life. On a used amplifier, the difference between a lightly used unit and a heavily toured one of the same grade is real, and only the service record separates them.
If you are comparing this against other amplification options, the used amplifiers and DSP is the right place to benchmark channel count, DSP and networking against your rack plan.
Ask for the serial number of each of the five units, the production year, and any service or repair records. Ask what "Tested: Yes" covered — load, duration and result — and request photos of the rear panel showing XLR inputs, Speakon outputs and NomadLink IN/OUT, plus the front panel with knobs and mode switches. Confirm the DSP firmware state and whether presets can be reset.
Confirm voltage (200-240V ~ 50-60Hz) matches your distribution. Confirm what is included: rack ears, flight case, packaging. Then ask for availability and a quote on the specific units, and consider buying one unit first before committing to the batch.
For shipping and documentation planning on a multi-unit order, the used LAB.GRUPPEN FP10000Q for sale page is the reference point for this specific listing.
Yes. The listing states 4 channels at 2500W @ 4Ω per channel, with built-in DSP, XLR balanced inputs and Speakon speaker outputs.
The listing shows NomadLink IN/OUT and network: NomadLink, with front-panel rotary knobs, LED indicators and mode switches for local control.
The listing states 200-240V ~ 50-60Hz. No other voltage option is disclosed.
Quantity available is 5 and the condition grade is A. Serial numbers, service records and operating hours are not disclosed.
The listing marks it as tested, but the test procedure, load, duration and results are not disclosed — ask the seller for details before paying. ## Sources
OxGears listing: LAB.GRUPPEN FP10000Q (amplifiers-dsp) — /products/lab-gruppen-fp10000q/
Manufacturer published specifications for LAB.GRUPPEN FP10000Q — no verifiable URL supplied.
Want to confirm stock, shipping cost or lead time? Ask about availability and we will check the unit for you.
High-performance four-channel professional amplifier manufactured in Sweden, equipped with built-in DSP and NomadLink network control. Supports XLR balanced inputs and Speakon outputs, suitable for driving large line arrays, main PA, or low-frequency systems.
A tested Grade A XTA DX1 offers 8 channels of DSP with AES, analogue, and SI inputs. Learn what to verify before buying for your rental or integration needs.
Used EV VXXA in Grade A: what the 2-channel 1000 W DSP amplifier listing does and does not tell export buyers, and what to confirm before paying.
Grade A used Crest Audio Pro 8200: 2 channels, 2000 W @ 4Ω, XLR and speakON I/O, 2U, 12.7 kg, no DSP. What the listing says and what to check before paying.
